three examples of zebedee Clothing rack fitted to sloped ceilings with clothes on a neutral background

Measure and Fit Your Zebedee With Ease

Fit direct to a wooden beam, wardrobe top or wooden support.

If fitting into an alcove, leave space at the top for the bracket to angle towards the side wall.

How It Works

Easy Fit Installation

  • Step 1 - Measure Your Space

    Allow for the top bracket to protrude, and also for screwdriver access.

  • Step 2- Plan Your Sizes

    Zebedee sizes are back of bracket to back of bracket - combine sizes for longer runs.

  • Step 3 – Fit to the Angle

    Fit bottom bracket first and use the rail as a template to position the top bracket.

  • ..Step 4 – Hang Clothes and Enjoy!

    Hook up or hook down -clothes hang neatly with no wasted space – even under steep slopes.

1 4
Easy Fit Installation

Here's a quick step-by-step guide on

How to measure and fit The Zebedee Any Angle Hanging Rail

Did you know?

A Zebedee rail mounted on a slope actually experiences less gravitational pull than a horizontal rail of the same length. Our custom-designed brackets work with the slope, providing robust support. Because the screws are installed at an angle and feature a panhead design, the system is exceptionally secure—minimizing stress on the fixing points.

We occasionally receive returns due to concerns that a ceiling isn’t strong enough to support the rail. While we are always happy to accept returns, it’s worth noting that installation is usually much simpler than expected. Even in challenging situations, there’s often a practical solution.

Resources for You:


  • Real-world fitting examples from our customers

  • A video installation guide by Free Bird Interiors

  • Downloadable measuring and fitting instructions available before you buy

Have a Zebedee project or experience you'd like to share? We'd love to hear about it! Please get in touch at diane@zebedee.co

Fitting Demonstration by Free Bird Interiors

Clothing hanging from an angled yellow clothing rail attached to a sloped roof.

One option is to fit a baton to the ceiling first, (a bit like fitting a curtain rail) either straight into the beam behind the plaster board, or by using plaster board plugs every 10″ or so to share the weight. The Zebedee Rails can then be fitted straight to that very simply!

Very steeply angled sloped roof with a clothing rail fitted. Clothes hangers are hanging from the railing.

Bridge two loft beams with a wider, decorative piece of wood, like fitting a wardrobe top, and then you can centralise the fitting of your Zebedee’s. 

Or

3 angled clothing rails fitted into 3 different sized recesses in a wall, all with sloped ceilings and clothing hanging from them.

Easily top fix into any sloping wardrobe!

Then sit back and enjoy your beautifully organised, fully utilised space!

For full instructions on how to measure and install The Zebedee Hanging Rail please down load our instruction leaflet below.

Instruction Leaflet